When you experience problems with your air conditioning unit, the best option you can take is calling in an HVAC contractor. However, in some instances, you can solve the problem by doing some basic troubleshooting and see if helps. If your system isn’t cooling, be sure that the thermostat is set at a lower level than room temperature. Also, make sure that it is set to cool to ensure that it will be blowing in cold air. It also helps to place fresh batteries inTO your thermostat to ensure that it is working correctly.
Air conditioner repair steps you can do at home
The moment that you figure out that your air conditioning unit isn’t working properly, you have a bunch of options. This is to either check the problem yourself and figure out a solution or call for air conditioner repair. On the other hand, the latter option is most suited if the damage is severe. Most of the time, air conditioning problems are solvable with a few troubleshooting steps.
Prior to doing anything else, you must check if there is power being supplied to the unit or if the unit is still in operation. If the fans turn on, that means there is power and you can move to another probable cause of failure. The next thing to do is switching the fan from ‘on’ to auto. This will ensure that the system provides enough power to cool or heat the house. Check if there is cooling or heating. Most of the time, incorrect thermostat settings is the culprit.
On the other hand, if the blower works but there isn’t any cooling, there must be a problem with the condenser. Check the circuit breaker panel for any signs of problems. The breaker could have tripped for some reasons. Inspect the outside unit and press the reset button. It is normally located near the refrigerant lines. After resetting your HVAC unit, check to see if there is cooling inside the house.
If there still isn’t any cooling, be sure to have the number for your HVAC repair North Myrtle Beach specialist ready. You could tell when you can’t DIY the problem any longer if cooling doesn’t come back after resetting your unit. You may verify this by checking the large copper lines. If the copper line is warm, this means that there is either a problem with the compressor or that the system is malfunctioning.
In such cases, it is best to leave it to the experts like NMB HVAC Pros. Basically, in these cases, you have little to no options left than to have in a professional. Always have it checked out when these signs appear. When HVAC units fail, they tend to require servicing. There really isn’t much that a homeowner can do after completing the basic checkups. When in doubt about the status of your HVAC system, always call a reputable professional to have it checked further and fixed appropriately.
Call NMB HVAC Pros if you need expert help in installing, repairing, or maintaining your air conditioning unit.
NMB HVAC Pros
North Myrtle Beach, SC, 29582